Fixing the glass on a REDMI 5 GLASS involves several steps and requires specific tools and materials. Here is a detailed guide on how to replace the broken or damaged glass on your Redmi 5:

Tools and Materials Needed

1. Replacement Glass: Ensure you have the correct glass for the Redmi 5.
2. Heat Gun or Hair Dryer: For softening the adhesive.
3. Plastic Pry Tools: For prying open the phone without damaging it.
4. Suction Cup: To help lift the screen.
5. Phillips Screwdriver: For removing screws.
6. Tweezers: For handling small components.
7. Isopropyl Alcohol: For cleaning the surfaces.
8. Adhesive Strips or Glue: To attach the new glass.
9. Microfiber Cloth: For cleaning.
10. Antistatic Gloves: To prevent static damage to components.

Step-by-Step Guide

1. Power Off the Phone

• Turn off your REDMI 5 GLASS completely before starting the repair to avoid any electrical issues.

2. Remove the Back Cover

• Use a plastic pry tool to remove the back cover carefully. Insert the tool between the back cover and the frame, and gently work your way around the edges to release the clips.

3. Remove the Battery

• Disconnect the battery connector using a plastic tool. Remove any screws securing the battery and lift it out carefully.

4. Remove the Screws

• Use a Phillips screwdriver to remove all screws securing the mid-frame. Keep track of the screws as you will need them later.

5. Detach the Screen Assembly

• REDMI 5 GLASS Use a heat gun or hair dryer to heat the edges of the screen. This softens the adhesive, making it easier to remove the screen.
• Place a suction cup on the screen and gently pull to create a gap. Use a plastic pry tool to separate the screen assembly from the frame.

6. Disconnect the Screen

• Carefully disconnect the ribbon cables that attach the screen to the motherboard. Be gentle to avoid damaging the connectors.

7. Remove the Broken Glass

• If only the glass is broken and the LCD is intact, you will need to separate the glass from the LCD.
• Heat the glass with a heat gun to soften the adhesive.
• Use a plastic pry tool to gently lift and remove the broken glass. Be cautious to avoid damaging the LCD underneath.

8. Clean the Surface

• Use isopropyl alcohol and a microfiber cloth to clean any remaining adhesive residue from the LCD.

9. Install the New Glass

• Apply new adhesive strips or glue around the edges of the LCD.
• Carefully align and place the new glass onto the LCD, pressing down gently to ensure a secure fit.

10. Reconnect the Screen

• Reconnect the ribbon cables to the motherboard.

11. Reassemble the Phone

• Place the screen assembly back onto the frame and secure it with the screws you removed earlier.
• Reinstall the battery and connect it.
• Snap the back cover back onto the phone.

12. Power On and Test

• Turn on the phone and test the new glass to ensure touch functionality and display quality are intact.

Tips and Warnings

• Patience: Take your time during the process to avoid causing additional damage.
• Heat Management: Be careful not to overheat the phone, as excessive heat can damage internal components.
• Static Precautions: Wear antistatic gloves to prevent static damage to electronic components.
• Professional Help: If you are not comfortable performing the repair yourself, it may be best to seek professional help.

By following these steps carefully, you can replace the broken glass on your REDMI 5 GLASS and restore it to full functionality.