VIVO X27 GLASS

 

Replacing the glass on a Vivo X27 Glass is a delicate process that requires precision and patience. Below is a detailed guide on how to replace the broken or damaged glass on your Vivo X27:

Tools and Materials Needed

1. Replacement Glass: Ensure you have the correct glass for the Vivo X27.
2. Heat Gun or Hair Dryer: For softening the adhesive.
3. Plastic Pry Tools: For prying open the phone without damaging it.
4. Suction Cup: To help lift the screen.
5. Phillips Screwdriver: For removing screws.
6. Tweezers: For handling small components.
7. Isopropyl Alcohol: For cleaning the surfaces.
8. Adhesive Strips or Glue: To attach the new glass.
9. Microfiber Cloth: For cleaning.
10. Antistatic Gloves: To prevent static damage to components.
11. SIM Card Ejector Tool: To remove the SIM card tray.

Step-by-Step Guide

1. Power Off the Phone

• Turn off your VIVO X27 GLASS completely before starting the repair to avoid any electrical issues.

2. Remove the SIM Card Tray

• Use the SIM card ejector tool to remove the SIM card tray.

3. Remove the Back Cover

• Use a heat gun or hair dryer to heat the edges of the back cover to soften the adhesive.
• Insert a plastic pry tool between the back cover and the frame. Gently work your way around the edges to release the adhesive and lift the back cover.

4. Disconnect the Battery

• Use a Phillips screwdriver to remove any screws securing the battery connector shield.
• Carefully disconnect the battery connector using a plastic tool. Do not remove the battery yet.

5. Remove the Screws

• Use a Phillips screwdriver to remove all screws securing the mid-frame. Keep track of the screws as you will need them later.

6. Detach the Screen Assembly

• Heat the front screen edges with a heat gun or hair dryer to soften the adhesive.
• Place a suction cup on the screen and gently pull to create a gap. Use a plastic pry tool to carefully separate the screen assembly from the frame.

7. Disconnect the Screen

• Carefully disconnect the ribbon cables that attach the screen to the motherboard. Be gentle to avoid damaging the connectors.

8. Remove the Broken Glass

• If only the VIVO X27 GLASS is broken and the LCD is intact, you will need to separate the glass from the LCD.
• Heat the glass with a heat gun to soften the adhesive.
• Use a plastic pry tool to gently lift and remove the broken glass. Be cautious to avoid damaging the LCD underneath.

9. Clean the Surface

• Use isopropyl alcohol and a microfiber cloth to clean any remaining adhesive residue from the LCD.

10. Install the New Glass

• Apply new adhesive strips or glue around the edges of the LCD.
• Carefully align and place the new glass onto the LCD, pressing down gently to ensure a secure fit.

11. Reconnect the Screen

• Reconnect the ribbon cables to the motherboard.

12. Reassemble the Phone

• Place the screen assembly back onto the frame and secure it with the screws you removed earlier.
• Reconnect the battery and secure the connector shield with screws.
• Snap the back cover back onto the phone. Apply heat if necessary to soften the adhesive for a secure fit.

13. Insert the SIM Card Tray

• Reinsert the SIM card tray into the phone.

14. Power On and Test

• Turn on the phone and test the new glass to ensure touch functionality and display quality are intact.

Tips and Warnings

• Patience: Take your time during the process to avoid causing additional damage.
• Heat Management: Be careful not to overheat the phone, as excessive heat can damage internal components.
• Static Precautions: Wear antistatic gloves to prevent static damage to electronic components.
• Professional Help: If you are not comfortable performing the repair yourself, it may be best to seek professional help.

By following these steps carefully, you can replace the broken glass on your VIVO X27 GLASS and restore it to full functionality.

VIVO X27 GLASS

NOTE : GSMSMARTPRICE is gathering the best information from various websites live prices may defer from the listed price